What my classroom looks like

This is my enameling station.

this is my wax station, where we sprue and fix broken rings, or add wax as necessary.

This is my back counter where I keep the roller mill and the anvils. The anvils are mostly old rail road track. I screwed them to the bench with a towel under each one to cut the vibration noise.

This is the back corner where I keep the drill press and disc sander.

This my drum sander. I have the sanders because I don't want the nonferrous metals to be used on the grinders. The ceramic pot has water in to cool the metals as you are sanding.

This is them miter saw I use cut wax tubes. It was $5 at a yard sale.

This is my table with ring lathes. I wired all the lathes to switches and then the switches to an extension cord so I can plug them all in at once.

This is on my back counter past the anvils, it is my bench vise where we use the draw plates and forming stakes. This is also where I have lathes and my scroll saw. The entire back counter is filled with drawers where I keep things like wax, nice hammers, lathe tools, extra wire and so on.

This is the end of my back counter where I have one more lathe, another belt/disc sander and under the counter I have the Pickle buckets.

This is my soldering station. There are 5 torches, patinas on the shelf, and nickle pickle plus regular pickle. I love the vent hood, I played the safety card to get it.

This is a station with a couple of flex shaft tools.

This is my stone setting, engraving, and wax carving station. There are 2 flex shafts and an apron to stop from dropping the stones.

This is my white box where I take photos of the students work.

This is the polishing station, I have a tripoli machine, Rouge machine, grinder, and lap felt buffer.

Right beside the buffers is the ultra-sonic cleaner, the sink and  the steam cleaner.

This is my lapidary station. There are three sets of grinding wheels and 2 stone saws.

This is the lampwork bead station. I have two torches. I just decided to charge the students $1 per hour, and then $.15 per gram for glass, I hope that will be enough to keep it up. If you have better pricing methods, would you let me know?

This is a large scotch bright buffer/grinder. Nest to it is a storage room.

This looking at my room from the door. I have 9 tables, 6 of which are set up for students to use.

This is a picture from the front of the room looking at the cabinets where I keep tools and student work.

These are my display cases.

This is how I organized my main tool cabinet.

This is the book case I made to hold the Text books(Complete Metal Smith by Tim McCreight)

This is inside my storage room that I keep locked up whenever I am not in it. I have my silver, nickle silver and solder on the wall. The plate metal is in the back corner. I have scrap metal in the drawers and chemicals in the cabinets.

This is the other side of the storage room where brass wire and nice tools are stored.

Again in the storage room, the Metal plating spot. I wish it were right by a sink, but I want it safe, so it is here instead.

The storage room, stones, drills, and so on.

My centrifuge casting station.

We invest in this spot, far from a sink to avoid having plumbing problems.

This is the vacuum casting spot, right across this room from the investment spot.

This is the burn out kiln.

I thought it might be nice to see how I set things up. I would like to see your shops if you could.